- Parameters
- Product Name
- Detection Gas
- Product Features
- Detection Range
- Resolution
- Typical Accuracy
- Detection Method
- Display Screen
- Power Supply
- Maximum Power Consumption
- Operating Environment
- Data Storage
- Printing Function
- Signal Output
- Alarm Method
- Fall Alarm
- Wireless Transmission
- Dimensions: L*W*H
- Weight
- Protection Level
- Standard Accessories
- Optional Accessories

- Gas online monitoring pretreatment system TH-2000-C
- SO2, NOX, O2, CH4, CO, CO2, NH3, H2S, VOC and other types of gases, can alsoTest wind speed, wind direction, rainfall, atmospheric pressure, pipeline pressure, temperature and humidity and other meteorological parameters, and select according to customer requirements
- 1. Cost-effective
2. With touch display
3. Complex working conditions, high humidity and low dust occasions
4. The sampling temperature is within 600, and a higher temperature can be optionally equipped
5. Automatic cooling, dehumidification and drainage
6. High-dust occasions need to be used with gas cleaning back-blowing system.
- Not have
- Online continuous work, pump suction sampling (positive pressure, negative pressure environment)
- 7-inch touch color screen display
- 220VAC, 50HZ
- Not have
- - 40℃~+70℃, ≤95%RH
- Not supported for the time being
- Not have
- 4~20mA, RS485, multiple passive contacts, optional: wireless transmission, network transmission
- Optional external sound and light alarm light
- Not have
- Optional: LoRa/433M/4G/NB-IOT
- 500*350*850mm (L*W*H)
- About 40kg
- Outdoor waterproof type, optional explosion-proof type
- Match according to the needs
- Electric heat tracing system, sampling head of various specifications, exhaust booster pump

- Gas cleaning back blowing system TH-2000-C
- SO2, NOX, O2, CH4, CO, CO2, NH3, H2S, VOC and other gas types can also be tested.Measure wind speed, wind direction, rainfall, atmospheric pressure, pipeline pressure, temperature and humidity and other meteorological parameters, and select according to customer requirements.
- Completely remove corrosive gases, water-soluble gases, tar, crystalline substances and dust, which can be used in high-dust environments (practical high-dust sampling heads), corrosive gas environments, and gas-will crystallization environments. Sensors that use high-end infrared principles must be equipped with this system.
- Not have
- Online continuous work, pump suction sampling (positive pressure, negative pressure environment)
- 7-inch touch color screen display
- 220VAC, 50HZ
- Not have
- - 40℃~+70℃, ≤95%RH
- Optional 100,000 data or 16G large-capacity SD memory card, USB flash drive storage
- No printing function, optional wireless Bluetooth printer for printing
- 4~20mA, RS485, multiple passive contacts, optional: wireless transmission, network transmission
- Not have
- Not have
- 4~20mA, RS485, multiple passive contacts, optional: wireless transmission, network transmission
- 500*350*850mm (L*W*H)
- About 40kg
- Outdoor waterproof type, optional explosion-proof type
- Match according to the situation
- 1 set of online monitoring pretreatment system (including 1 corresponding gas detector) Product manual 1 book1 infrared remote control Upper computer connection software (free of charge in the form of email) 1 copy RS485 modbus (RTU) communication protocol (sent by email) 1 copy

- Micro Air Station Online Monitoring System TH-2000-A
- SO2, NO2, O3, CO, VOC and other types of gases, other gases can be selected, such as NO, O2, CH4, CO2, NH3, H2S, etc., and can also detect PM2.5, PM10, TSP, wind speed, wind direction, atmospheric pressure, temperature and humidity, rainfall, illuminance, noise, etc. Meteorological parameters, selected according to customer requirements
- 1. Micro air monitoring station
2. Support LORA, NB-IOT, 4G/5G
3. Monitor the air quality and upload the data to the Environmental Protection Bureau
- Not have
- Online continuous work, pump suction sampling (positive pressure, negative pressure environment)
- 7-inch touch color screen display
- 220VAC, 50HZ
- Not have
- - 40℃~+70℃, ≤95%RH
- 100,000 pieces of data, optional 16G large-capacity SD memory card, USB flash drive storage
- No printing function, optional wireless Bluetooth printer for printing
- 4~20mA, RS485, multiplex passive contacts, optional: wireless transmission 433, LORA, GPRS, NB-LOT, network transmission, etc.
- Optional external sound and light alarm light
- Not have
- Optional: LoRa/433M/4G/NB-IOT
- 500*340*800 (L*W*H)
- 40 kilograms
- Outdoor waterproof type, optional explosion-proof type
- Instruments, instructions, warranty cards, qualification certificates
- Match according to the situation

- Gas Online Monitoring System TH-1000
- Toxic gases, oxygen, carbon dioxide, flammable and explosive gases, TVOC
- 1. Cost-effective
2. Simple working conditions, non-high humidity, no dust occasions
3. Simple and small
4. Manual/automatic drainage
5. The sampling distance is short, about 10 meters
6. When the sampling temperature is low, it is about 70 degrees.
- 0~1、10、100、1000、5000、50000ppm(mg/m3;0~100%LEL;0~200mg/L;0~20%、50%、100%VOL;Other measuring ranges are optional
- 0.001ppm, 0.01ppm, 0.1ppm, 1ppm; 0.1%LEL; 0.1mg/L; 0.01%VOL, 0.001%VOL; other resolutions can be customized,
- Not have
- Fixed continuous operation, pump suction measurement (positive pressure, negative pressure environment)
- Display window
- 220VAC, 50HZ
- ≤±3%F.S (higher accuracy can be customized according to the sensor performance)
- - 40℃~+70℃, ≤95%RH
- Not supported for the time being
- Not have
- 4-20mA, RS485, passive contact, wireless transmission
- Optional external sound and light alarm light
- Not have
- Optional: LoRa/433M/4G/NB-IOT
- 400*220*500mm (L*W*H)
- About 15kg
- Outdoor waterproof type
- Pre-processing case, instruction manual, qualification certificate, warranty card, infrared remote control, packaging carton
- It can be matched according to the situation.

- Gas Online Monitoring System TH-3000
- NO, NO2, SO2, NH3, SO2, O3, BENZENE, TOLUENE, XYLENE
- Remove corrosive gases, water-soluble gases, tar, crystalline substances and dust, which can be used in high-dust environments (practical high-dust sampling head), corrosive gas environments, gas crystallization environments, high-temperature, high-humidity, high-dust occasions Analyzers and differential ultraviolet analyzers using high-end infrared principles should use this system.
- 0-10%vol, other measuring ranges can be customized
- Can be customized according to requirements
- Not have
- Online continuous work, pump suction sampling (positive pressure, negative pressure environment)
- 7-inch 9-inch touch color screen display, optional 15-inch industrial controller
- 220VAC, 50HZ
- Not have
- - 40℃~+70℃, ≤95%RH
- Not have
- No printing function, optional wireless Bluetooth printer for printing
- 4~20mA, RS485, multiple passive contacts, optional: wireless transmission, network transmission
- Optional external sound and light alarm light
- Not have
- Optional: LoRa/433M/4G/NB-IOT
- 800*450*1800 (L*W*H)
- 50 kilograms
- IP66 outdoor waterproof type, optional explosion-proof type
- Online differential ultraviolet spectrum analyzer 1 set of product manual 1 infrared remote control 1 computer connection software (free of charge in the form of email) 1 copy RS485 modbus (RT U) Communication protocol (sent by email) 1 copy
- Industrial control machine, electric heat tracing system, sampling head of various specifications, exhaust booster pump
Professional engineer
24-hour online serviceSubmit your needs and quickly recommend the right products for you
13480931872