1. Project Background

Keywords: Retention Pond, Hydrogen Sulfide, Ammonia, Temperature

Monitor ammonia and hydrogen sulfide levels, as well as temperature, within the retention p Ond.

AmbientTemperature, high humidity (gas drawn from the retention pond contains some moisture), normal press Ure, dust-free environment,

H2S: 0–25 ppm

< span>

NH3: 0-25 ppm

Temperature: -40°C to +120°C (actual gas temperature is ambient)

Testing Purpose: To verify the effectiveness of the client& #39;s own equipment in purifying hydrogen sulfide and ammonia.Results must be displayed to two decimal places.

2. Solution

Use a simple pre-trea Tment device to filter out moisture from the gas beFore measuring its concentration.

Pump-drawn system: gas From the retention pond is drawn through a pipeline for testing.

The product is installed outdoors with a stainLess steel housing and an IP67 protection rating.

3. Product Configuration

Product Model: TH1000-B-Y P

DetecTed gases: ammonia (NH3), hydrogen sulfide (H2S), and temperature

Detection range/resolution/detection principle:

NH3: 0–25 ppm, 0.01 ppm, electrochemical sensor with hYdrogen sulfide interference resistance;

H2S: 0–25 ppm, 0.01 ppm, electrochemical sensor;

Temperature: -40°C to +70°C, 0.1°C, capacitive sensor;

Equipped with an instrument housing made of S304 material, with a thickness of No less than 1.5 mm.

Includes a 10-meter flexible hose f Or connecting to ductwork and instruments,

Features an NPT 1/4-8 connector (S304).

Instrument protection rating: IP67.

four. On-site photos