Fixed gas detector is a commonly used gas detector in industry. It is mainly composed of two parts: controller and gas detector. Correct installation can effectively detect gas concentration. Next, the editor will summarize the installation requirements of the fixed gas detector for you.

The fixed gas detector is generally fixed on the wall, but different heights will affect the accuracy of the gas detector, so the installation requirements of the fixed gas detector are also relatively high.

When installing a fixed gas detector, you must first consider the density of the measured gas. As we all know, the density of gas is different from the density of air.It depends on whether it is greater than air. If it is greater than air, it should be installed below the gas release amount. If it is less than air, it should be installed above the measured gas leakage amount so that the gas can be detected.

Second, annual inspection.

In order to ensure the accuracy of detection, the gas detector should be calibrated at least once a year.

The distance between the controller and the gas detector.

The control device and the gas detector cannot be connected, and there must be a distance in the middle, usually about a few meters.

There are many installation methods for gas detectors. No matter which installation method is used, it must be firmly fixed to avoid vibration, dust and water. At the same time, it is necessary to consider the convenience of maintenance and calibration of the detector.

the above is a summary of the requirements for the installation of fixed gas detectors. have you got it yet!