Ammonia is the 1 toxic, flammable and explosive gas commonly used in industry. Ammonia detector is the 1 gas detector to detect the concentration of ammonia in the atmospheric environment. When the concentration of ammonia in the environment reaches or exceeds the preset alarm value, it will send out sound and light and vibration alarm signals. Therefore, in the use or production of ammonia places need to be equipped with ammonia detector, used to prevent ammonia leakage mixed with air caused by ammonia poisoning staff. However, due to different applications, the sampling methods used by the ammonia gas detector are also different. What are the sampling methods of ammonia detector ? The following is a brief introduction by Yiyuntian:

There are two main sampling methods for ammonia detector:

1. Diffusion:

The gas detector is a gas detector in the detection area that flows freely in the air and slowly flows the sample gas into the instrument for detection. This method is affected by the detection environment, such as ambient temperature, airflow, etc.

2. pump suction type:

pump suction gas detector is equipped with a small gas pump, its working mode is that the power supply drives the air pump to pump and sample the gas in the area to be measured, and then the sample gas is sent to the instrument for detection. The pump suction gas detector is characterized by fast detection speed, remote measurement of dangerous areas, maintenance personnel safety, and other diffusion gas detectors.

The content introduced above is the sampling method of ammonia gas detector. When choosing ammonia gas detector, you can choose the appropriate sampling method according to your actual needs.The ammonia detector can be widely used in various types of cold storage room, the presence of ammonia in the laboratory, ammonia storage warehouse and other industrial sites applied to ammonia, can effectively prevent poisoning, explosion accidents, to ensure the safety of life and property.