For some people in the chemical, petrochemical, steel and other dangerous areas, do a good job in flammable and explosive gas leak detection is a very important aspect. And we can sense the change of combustible gas concentration by installing combustible gas detector. When the measured gas concentration reaches or exceeds the set value, the controller will send out sound and light alarm signals, output relevant control signals, and start the corresponding control device, so as to avoid the occurrence of major accidents. However, the installation of combustible gas detector has certain requirements, so what are the installation requirements of combustible gas detector ? The following is a brief introduction by yi yun Tian:

The installation requirements of combustible gas detector are as follows:

1, should be in the case of power failure wiring.

2. the installation position should be as close as possible within a radius of 1 meter from the valve, pipeline interface, air outlet or place prone to leakage, but do not affect the operation of other equipment.

3. when used for large-area gas detection, a probe can be arranged with 20-50 square meters, which can achieve the effect of safety monitoring.

4. installation height: when detecting hydrogen, natural gas, city gas and other gases lighter than air, install it about 1 meter above the roof.

5. The installation method can be roof hoisting, wall hanging or connecting pipes, etc., and the installation should be firm and reliable.

6. The on-site wiring should be threaded through the pipe, the pipe used should meet the requirements, and the pipe should be connected with the probe to meet the requirements.

7. The sensor should be fixed downward during installation.

8. the installation of combustible gas detector should judge the leakage direction of combustible gas when a large amount of leakage occurs according to the specific factors such as airflow direction and wind direction of the place.

In summary, it is the installation requirements of the combustible gas detector. According to different environments and testing requirements, choosing the right and correctly installing the combustible gas detector is an aspect that everyone engaged in safety and health work must attach great importance. Especially for enterprises, protecting on-site safety is by no means the purchase of qualified products, but also requires standardized installation and perfect after-sales service.