As we all know, carbon monoxide gas is the 1 kind of colorless, tasteless, no stimulation, can not be perceived with the five senses of toxic gas, it can prevent the supply and use of oxygen, people in the inhalation caused by the human body hypoxia, until the threat of life. The carbon monoxide detector can accurately detect the content of carbon monoxide in the air, and will issue an alarm when it exceeds the set value. In the process of using, the longer the service life, the more cost can be saved. Therefore, we must pay attention to the maintenance of the carbon monoxide detector to extend the service life of the equipment. What should I do about the maintenance of carbon monoxide detector ? The following is a brief introduction by yi yun Tian:

maintenance of carbon monoxide detector:

1. Check the carbon monoxide detector regularly. Due to the harsh environment, long-term use will cause damage to the performance of the sensor, so be sure to pay attention to regular inspection and record inspection data. And replace it with a new one in time when the sensor is damaged or expired.

2. Keep the surface of the carbon monoxide detector clean and dry, and away from humid and corrosive gases and environments.

3. Store the carbon monoxide detector in an environment with appropriate temperature to avoid damage to components if the temperature is too high or too low. It is strictly forbidden to hit or beat the carbon monoxide detector.

4. Dust regularly. In use, there will be a lot of dust, impurities, etc., which are easy to enter the inside of the instrument, causing damage to the parts or measurement errors, so it is necessary to regularly remove dust from the carbon monoxide detector. But do not use harsh chemicals or detergents, etc., can be scrubbed with water and cotton cloth.

5. avoid blockage of the air holes of the detector. if liquid enters, immediately invert the carbon monoxide detector to make the liquid flow out by itself. avoid violent shaking.

6. Pay attention to the maintenance of the battery. Do not use the carbon monoxide detector under undervoltage. Make sure that the power is sufficient before each use.

In summary, it is the maintenance content of the carbon monoxide detector. Carbon monoxide detector is a safety equipment specially used to detect CO concentration and real-time numerical feedback. When the concentration exceeds the standard, it can send out alarm signal in time to prevent poisoning. It can continuously detect the concentration of toxic gas, oxygen and flammable and explosive gas, and observe the current gas concentration value at any time. At present, it has been widely used in petroleum, chemical, coal, metallurgy, paper, fire, municipal, telecommunications, food, Textile and other industries.