malodorous gas, in general, usually refers to the atmosphere, water, waste and other substances contained, can cause the body to hate the gas volatile substances, it can be spread through the air as a medium, the role of human sense of smell and is perceived by the 1 gas pollution. The odor detector is the 1 gas detector that can be used for the change of odor gas concentration, which can further strengthen the monitoring and control of odor pollution sources, so as to better realize the monitoring and treatment of odor gas. In order to better apply the odor detector, we also need to pay attention to some related matters in the process of using, so odor detector what are the precautions for using it? The following is a brief introduction by yi yun Tian:

precautions for using odor detector:

1. Keep the odor detector dry and strictly prohibit contact with water droplets. And avoid direct contact with corrosive liquids.

2. It is strictly prohibited to use the odor detector in a high temperature environment. Using the instrument at high temperature is likely to damage the sensor forever. Please refer to the temperature range of the instrument.

3. For malodor detectors that have not been dustproof, do not use the instrument in an environment with high dust density.

4. when the odor detector is turned on, there is a warm-up time. for the countdown of 60 seconds, it is not an instrument problem. please wait patiently.

5. Check the air inlet of the odor detector frequently for leakage and blockage, and keep the air inlet unblocked.

6. It is strictly forbidden to use the odor detector to detect the environment of unknown concentration, so as not to damage the sensor.

7. if the odor detector enters water carelessly, please do not open the instrument, disassemble the shell, timely dispose of the water droplets on the instrument, place it in a ventilated place for 48 hours, and return it to the manufacturer for re-inspection and calibration.

8. for the odor detector without dust prevention, it needs to be used in places with large dust. Use an emery cloth or paper towel to place at the air inlet. (and this method is not normally used)

9. please communicate with the technical personnel of the manufacturer in time when the odor detector is abnormal. Do not disassemble or repair the tester without permission. Because the stench detector has been calibrated by standard gas before leaving the factory.

In summary, it is the precautions for the use of the odor detector. For the detection of malodorous gases in various environments, we can use malodorous detectors for detection, so it is often used in sewage treatment plant detection, landfill plant detection, chemical plant sewage detection, river malodorous gas detection and so on.