in the face of the continuous occurrence of all kinds of combustible gas leakage, in many enterprises or residents in the home, are installed on the combustible gas alarm, in order to detect the presence of combustible gas in the place of the existence of combustible gas leakage. When the concentration of combustible gas exceeds the preset alarm value, the combustible gas alarm will sound and light alarm to remind people to take emergency rescue measures. Do you know how to deal with the emergency after combustible gas alarm alarm? The following is a brief introduction by yi yun Tian:

emergency handling after the combustible gas alarm alarms, the following :

1. When the combustible gas alarm alarms, found personnel should immediately go to the combustible gas alarm probe position to check the cause of the alarm, do not directly close the combustible gas alarm.

2. Notify the department head and safety officer immediately.

3. if flammable liquid leakage or flammable liquid vapor concentration standard (≥ 25℉) causes an alarm, immediately control the leakage source, strengthen ventilation in the leakage area, and notify the on-site personnel to evacuate in case of danger.

4. Clean the leakage source in the probe area of combustible gas alarm.

5. The combustible gas alarm can be reset only after the leak site is properly handled.

To sum up, it is the emergency treatment after the combustible gas alarm alarm. In the process of using the combustible gas alarm, we only need to correctly operate and use the combustible gas alarm, and at the same time, we should deal with it rationally after the combustible gas alarm emits sound and light alarm, so as to achieve the correct function of the combustible gas alarm. In addition, in order to ensure the sensitivity of combustible gas alarm detection, regular inspection is very important, otherwise it may lead to deviation, therefore, it is necessary to replace the combustible gas alarm in time.