Due to the increasing concern about gas safety, the demand and use of gas detectors in industrial production are gradually increasing. The frequency of using combustible gas detectors and toxic and harmful gas detectors in industrial and commercial enterprises is also increasing. According to the needs of different detection environments, the types of gas detectors are constantly changing, such as fixed gas detectors, portable gas detectors, catalytic combustion gas detectors, laser gas detectors, fluorescent gas detectors, etc.

Then how do we configure the gas detection device as needed?

For this, our online technicians have designed four configuration schemes, which are analyzed in detail below.

There are many types of equipment on the market that can meet the needs of gas detection in industrial and commercial places, and there are many configuration schemes, but this needs to be reasonably configured according to the actual detection needs of users. Generally, it can be divided into large, small and medium-sized, High-tech type, as follows:

1. large, medium and small industrial and commercial testing places are equipped with gas detectors.

Due to the large industrial and commercial sites due to the large detection site, the detection of gas types, therefore, the installation of gas detectors also need to consider many factors. For example, the types of harmful gases, the range of gas detectors selected, the distance between each gas detector during installation, and so on.

For example, in the installation position of flammable gas detector, indoor installation, instrument spacing should be controlled within 7.5 meters, outdoor installation, instrument spacing should be controlled within 15 meters; In the open or semi-open place to install flammable gas detector, instrument spacing should be controlled within 15 meters, when the detection point is located at the downwind side of the minimum frequency wind of the release source, the distance from the release source should be controlled within 5 meters.

due to the small detection area, small and medium-sized industrial and commercial testing places and gas detector collocation is relatively simple.

In addition to combining the performance of the gas detector according to local conditions, it is also necessary to consider the detection position of the gas detector.

The gas detector in a fixed/limited space obviously cannot meet the requirements, which 1 the use of portable gas detectors in special places.

The body is small and light, easy for the staff to carry, and the startup preheating speed is fast, which can realize the purpose of opening and using. The staff can also choose single gas detection or multi-gas detection mode according to actual needs. Our portable gas detector currently supports simultaneous detection of up to 5 gases.

Configuration advantages: according to local conditions, scientific collocation, selection of stable performance detection fast gas detector, with the correct maintenance and regular calibration, can ensure that the instrument during use to maintain stable output.

High-tech industrial and commercial testing sites are equipped with gas detectors.

Managing multiple gas detectors at the same time not only increases the workload of managers, but also affects management accuracy. It is necessary to integrate, optimize and strengthen the management of gas detection equipment by means of science and technology.

The self-developed intelligent industrial safety operation platform integrates query, statistics, management and remote control, and can assist managers in all aspects to manage all gas detection equipment in the plant area and realize remote control. It has indeed solved the problem of difficult management of gas detectors at multiple sites in terms of science and technology.