hydrogen detector is the 1 explosion-proof hydrogen leakage detection tool often used in chemical industry and power plant industry at present. it can effectively respond to the change of hydrogen concentration quickly, detect whether industrial hydrogen leaks and find out the leakage source. once the gas concentration exceeds the set value, it can alarm for you in time and take corresponding measures to avoid hydrogen explosion accident, ensure safe industrial operation. However, no matter what kind of gas detector in order to ensure the accuracy of its detection data, daily maintenance work is indispensable. So how should we do hydrogen detector routine maintenance work? The following is an introduction by Yi Yuntian:

Routine maintenance of hydrogen detector:

1. Keep the surface of the hydrogen detector clean to prevent the sensor part of the instrument from blocking and affecting the detection effect of the instrument.

2. After using the hydrogen detector, put the instrument back into the storage box in time to avoid falling.

3. Avoid using large-range hydrogen to impact the gas sensor to prevent sensor poisoning.

4. Make regular calibration to ensure the accuracy of the hydrogen detector. The calibration interval shall be controlled within 6 months.

5. there is a preheating time when the hydrogen detector is turned on. for the 60-second countdown jump, it is not an instrument problem. please wait patiently. Do not tap the instrument.

6. It is forbidden to use harsh chemicals, detergents or detergent with high concentration to clean the instrument. Please wipe with a clean cotton ball dipped in a little water or soapy water, and dry in time.

In summary, it is the daily maintenance of the hydrogen detector. In the process of using hydrogen detector, we must do a good job in daily maintenance.If there are some minor problems, we should also pay attention to timely maintenance, so that we can better extend the service life of the hydrogen detector, so that it can accompany us for a longer time.