I believe everyone knows that the chlorine gas detector can continuously detect changes in the chlorine gas concentration in the working environment. If the chlorine gas concentration in the air reaches the critical point set by the explosion or poisoning alarm, it will send an alarm signal to remind the staff to take safety measures. It is precisely because of the importance of the chlorine detector for safe production that we should pay attention to the relevant aspects in the process of selection in order to better ensure the safe use of the chlorine detector. Do you know what aspects should be paid attention to in the selection of chlorine gas detector ? The following is a brief introduction by yi yun Tian:

The following aspects should be noted in the selection of chlorine detector:

1. Pay attention to the detection interference between various sensors

Although the hydrogen detector can simultaneously detect a variety of other, but the detector is not any combination of toxic and harmful gases.Generally speaking, each gas sensor corresponds to a specific detection gas, but any 1 gas detector cannot be. Therefore, when selecting the 1 gas sensor, we should know as much as possible the detection interference of other gases to the sensor, so as to ensure its accurate detection of specific gases.

2. Pay attention to the concentration measurement range of the hydrogen detector

the hydrogen detector has its fixed detection range for all kinds of toxic and harmful gas detectors. Only when the measurement is completed within its measurement range can the instrument be accurately measured. And for a long time beyond the measurement range of measurement, it may cause damage to the sensor. For example, the LEL detector, if accidentally used in an environment with more than 100 percent LEL, may completely burn the sensor.

3. Pay attention to the stability of the chlorine detector

‍

Poor stability of chlorine detectors affects the detection effect of the factory and increases the risk of chlorine leakage without detection. In other words, the stability of the chlorine detector refers to the quality of the product. Therefore, in the process of selecting the chlorine detector, we must pay attention to the choice of the stability of the chlorine detector.

To sum up, chlorine gas is more harmful in some aspects that should be paid attention to in the selection of chlorine gas detector. In some places with chlorine gas leakage and generation, chlorine gas detector needs to be used to strictly monitor and control the concentration change of chlorine gas, therefore, we must pay attention to the selection of chlorine gas detector.