If people, who have been in an environment with high carbon monoxide content, are often prone to poisoning and suffocation, which is why many workplaces are equipped with carbon monoxide gas detectors. When the carbon monoxide content exceeds the standard, the staff must be equipped with corresponding protective measures. However, the carbon monoxide detector is a gas-sensitive component, most of which uses electrochemical principles, and the sensitivity will decrease over time. Therefore, we must detect it regularly. How often does the CO detector check? The following is an introduction by Yi Yuntian:

In general, carbon monoxide detectors are inspected once a 1. According to the actual needs, of course, the shorter the better.

1. The normal calibration time of the carbon monoxide detector is not more than one year, and the period from product delivery to regular maintenance is one year. The correction is mainly based on the aging of the gas monitoring probe. The correction is to avoid the decrease of the sensitivity of the monitoring probe. If the gas detector fails to monitor the gas concentration in time when the gas concentration increases, the sensitivity of the gas detector decreases or there is a problem with the calibration of the instrument.

2. the verification period can be 3 months, 6 months and 12 months according to the location, frequency and impact of the carbon monoxide detector on the production process.

3. The new sensor should be exposed to various environments, even if it is not suitable for the environment. After using for up to ten days, daily sensor detection should be carried out in the atmospheric environment.

4. When the carbon monoxide detector changes in operation and environment, it should be rechecked.

since the carbon monoxide sensor, the core component of the carbon monoxide detector, needs to be calibrated once a year, the main purpose of this is to improve its sensitivity, accuracy and stability in detecting carbon monoxide, and some manufacturers will charge a certain fee for calibrating the carbon monoxide detector, mainly the cost of labor and raw materials used and the response calibration technology provided.

about how often the carbon monoxide detector is detected, today's small edition will introduce it to you. The carbon monoxide detector needs to be tested at least once a year, so that the carbon monoxide gas leakage can be detected quickly, accurately and stably, so as to realize the safety protection of the carbon monoxide environment in a true sense and improve the safety of on-site operators.