combustible gas on-line detector is the 1 gas detector used to detect the concentration of combustible gas in various environments. it can be widely used in 24-hour continuous on-line monitoring of combustible gas concentration on site and measurement of temperature and humidity, on-site display of concentration and over-standard sound and light alarm, and remote data transmission. After all, there are many natural gas pipeline explosion accidents. In order to effectively prevent these accidents, the installation of combustible gas online detector has become the only choice. So which gases can be detected by combustible gas online detector ? The following is a brief introduction by yi yun Tian:

combustible gas on-line detector can detect the following gases:

ethanol C2H6O, acetylene C2H2, ethane C2H6, ethyl boron duB2H6, propane C3H8, liquefied gas LPG, combustible gas sensor zhi module, hydrogen H2, fluorine F2, fluorine dao hydrogen fluoride HF, H2eTO, formaldehyde hydrogen phosphide 3, hydrogen chloride HCL, organic volatile VOC/TVOC, acrylonitrile C3H3N, toluene C7H8, chlorine CL2, phosgene COCL2, xylene C8H10, carbon disulfide CS2, methyl bromide CH3Br, etc.

Combustible gas detector is a detector that responds to single or multiple combustible gas concentrations. There are two types of combustible gas detector: catalytic type and infrared optical type. Catalytic combustible gas detector is the use of refractory metal platinum wire after heating resistance changes to determine the concentration of combustible gas. When the combustible gas enters the detector, it causes an oxidation reaction (flameless combustion) on the surface of the platinum wire, and the heat generated increases the temperature of the platinum wire, and the resistivity of the platinum wire changes.

In summary, the combustible gas online detector can detect some gases. In order to ensure safety, when we use the combustible gas online detector, the on-site personnel wear the combustible gas detector, which can monitor the combustible gas concentration around him in time. Once the concentration of combustible gas exceeds a certain value, a low alarm and a high alarm will be issued in time to remind the site personnel to leave the site and ensure the safety of the operators.