1, places affected by steam and lampblack

the detector in the gas detection alarm is 1 very sensitive component, and its probe can maintain a high degree of sensitivity in a clean environment. therefore, when installing the gas detector, be sure to avoid the place where there is oil smoke and steam, because if the oil smoke is attached to the surface of the probe, it will not be able to contact with the outside air normally, and the moisture in the steam will cause the detector to rust.

2, places with large air flow

no matter how much the specific gravity of the gas is, it will be gradually blown away and diluted under the circulation of air, and it is impossible to accurately measure the gas in the environment. Therefore, when installing the gas detection alarm, avoid places where the air flow is relatively large, such as next to the ventilation fan, near the vent, and around the air outlet. Install the gas detector to bypass these places.

3, places where the temperature is too high or too low

when the temperature is lower than minus 40 degrees celsius or higher than 70 degrees celsius, the parts of the gas detection alarm will be affected, resulting in accuracy errors in gas detection, serious or even cause damage to the gas detector itself, so when installing the detector, be careful not to install it in places with extreme temperatures.

where should the gas detector be installed? I have already told you that friends who need to know gas detector can come to yiyuntian for consultation and understanding. we have professional personnel to answer your questions.