The composite gas detector has the characteristics of simultaneous multi-gas concentration display, so it can be widely used in methane, ethane, propane, butane, alcohol, formaldehyde, carbon monoxide, carbon dioxide, ethylene, acetylene, vinyl chloride, Styrene, acrylic acid and many other gases to detect. However, in the process of using the composite gas detector, we must pay more attention to its maintenance work. Only by doing a good job of maintenance can the composite gas detector play a greater role. Do you know how to maintain composite gas detector ? The following is a brief introduction by yi yun Tian:

Composite Gas Detector should do the following maintenance work:

1. It is forbidden to contact the composite gas detector with high concentration gas above the detection range frequently, and it is forbidden to collide and disassemble the sensor, otherwise the working life of the sensor will be lost.

2. In order to ensure the measurement accuracy, the composite gas detector should be calibrated regularly, and the verification period should not exceed one year.

3. Prevent the composite gas detector from falling from a height or from severe vibration.

4. The composite gas detector is detected under normal working environment, and the working life of the sensor is more than two years.

5. Use the composite gas detector in a place without corrosive gas, oil fume, dust and rainproof.

6. If the machine does not respond for a long time, please turn off the power and restart.

In summary, some maintenance work should be done for the composite gas detector. By doing a good job in daily maintenance, we can make the composite gas detector have a longer service life while maintaining accurate measurement.