Before we use the combustible gas alarm, we need to install it first. Thus, it can be seen that the installation is of great importance to the use of the combustible gas alarm, and it will directly affect the normal operation of the later equipment to a certain extent. Do you know what factors should be considered when installing Combustible Gas Alarm ? The following is an introduction by Yi Yuntian:

:

1. according to the use environment, select the specific combustible gas to be mainly detected, because the gas sensor, the core component of combustible gas alarm, needs to be calibrated according to industry regulations as the main basis for detection, this is closely related to the specific inspection of combustible gases, such as methane, toluene, methanol, ethylene oxide, gasoline, kerosene, jet fuel and other combustible gases, there are certain differences in the detection standards, which is the basis for ensuring safety testing.

2. According to the specific environment, design the combustible gas alarm system design scheme, need to consider the gas pipeline coverage to select the installation point, the proportion of combustible gas and air to select the installation location, the specific area of the environment to be detected to determine the number of combustible gas detectors and the selection of the host of the gas alarm controller.

To sum up, we can see that the installation of combustible gas alarm should be considered comprehensively according to the use environment and the specific environment. In this way, when the concentration of combustible gas reaches the critical point of the lower or upper explosion limit in the industrial environment, the combustible gas alarm will send out an alarm signal to remind the staff to take safety measures, and drive the exhaust, cut-off, and spray systems to prevent Explosion, fire, and poisoning accidents, thereby ensuring safe production.