Ammonia alarm is the 1 commonly used industrial testing equipment, which can detect ammonia content and ammonia concentration to ensure the safe operation of production. However, in the process of using the ammonia gas alarm, sometimes there will be inaccurate detection, which may easily lead to accidents. Therefore, it is very important to solve the problem of inaccurate detection of ammonia alarm. Do you know how to solve the problem that the Ammonia Alarm cannot detect correctly? The following is an introduction by Yiyuntian:

:

1. Carefully check instrument performance

If the detection range is out of the normal range, this means that the ammonia alarm may be malfunctioning.Therefore, before using the ammonia alarm, carefully check the performance of the instrument to ensure the normal use of the instrument.

2. New and replaced inspection instrument

3. Maintain and clean instruments

there are a lot of sensors, if there is any dirt on the outside, it will affect the normal detection of the instrument. Therefore, the instrument is regularly maintained and cleaned to maintain the high precision and high reliability of the ammonia alarm.

4. Replace aging parts

5. Adjust the system

, the inaccurate detection of the ammonia gas alarm may be caused by improper system adjustment. Therefore, the system settings of the ammonia gas alarm should be adjusted regularly to ensure the normal detection of the ammonia gas alarm.

In summary, this is the solution to the inaccurate detection of ammonia alarms. When the ammonia alarm detection is not allowed, we can solve it through the above methods. If it is really impossible to solve it, it should be sent back to the manufacturer for maintenance in time.