in the process of industrial production, we install a gas alarm. when flammable or toxic gas leaks, when the gas concentration reaches the set alarm value, the gas alarm will send out sound and light alarm signals to remind us to take safety measures such as personnel evacuation, forced exhaust, shutdown of equipment, etc. to prevent explosion, fire and poisoning accidents, thus ensuring safe production. Do you know how to deal with the emergency after the gas alarm alarms? The following is a brief introduction by yi yun Tian:

emergency treatment method after gas alarm, as follows:

1. do not turn on any electrical switch after turning on the light when the gas alarm gives an alarm, so that the active blocking equipment works due to gas leakage.

2. When the gas alarm gives an alarm, under the condition of ensuring safety, immediately find out the cause of the alarm, and it is strictly forbidden to directly turn off the gas alarm.

3. After the gas alarm gives an alarm, keep away from the leak point and notify the department head and safety director immediately after reaching a safe position.

4. if flammable liquid leakage or flammable liquid vapor concentration standard (≥ 25℉) causes an alarm, immediately control the leakage source, strengthen ventilation in the leakage area, and notify the on-site personnel to evacuate in case of danger.

5. Clean the leak source in the gas alarm probe area.

6. The gas alarm can be reset only after the leak site is properly handled.

In summary, this is the method of emergency treatment after the gas alarm alarms. In the process of using the gas alarm, we need to correctly operate the gas alarm, and at the same time, we should deal with the gas alarm rationally after the sound and light alarm, so as to achieve the correct function of the gas alarm.