Combustible gas alarm is the 1 kind of gas leakage detection and alarm instrument, which can monitor the corresponding gas concentration in a large range, and timely alarm through the alarm device when the upper and lower limits are exceeded. However, if we want to achieve this function for a long time, then we need to regulate the use of combustible gas alarm, in order to better ensure the long-term stability of combustible gas alarm. Do you know how to regulate the use of combustible gas alarm ? The following is a brief introduction by yiyuntian electronics:

:

1. be familiar with the combustible gas alarm device to be monitored, understand the device in detail, know the specific points where the device may leak, and then effectively analyze the leakage pressure, direction and other related factors of these points. Then, according to the severity of the leakage of the estimated possible leakage point, the grade is divided, and the accurate distribution map of the probe position is drawn, and the grade is marked, such as heavy, medium, light, etc. or other substitute symbols.

2. estimate the environment where the leakage may occur and the general direction of the leakage. according to the specific conditions of the place, judge the specific natural factors such as the airflow direction and wind direction of the combustible gas alarm, and select a better installation location.

3. analyze the density of the possible leaked gas, and at the same time work out the flow trend chart of the leaked gas in combination with the air flow trend. according to the flow direction of the combustible gas alarm, set the initial point scheme at an appropriate position downstream of it.

4. analyze the approximate leakage status of possible leakage points, such as possible micro-leakage, spray, etc. and take countermeasures.For the case of micro leakage, the installation position of combustible gas alarm should be close to the point where the leakage may be located. In the case of serious cases such as jet-like leakage, the equipment to be installed should be slightly away from the point of possible leakage. It is then necessary to synthesize these possible situations and work out a better setting point scheme.

In summary, it is the method of standardizing the use of combustible gas alarms. The method of standardizing the use of combustible gas alarm is based on the environment in which the gas may leak, and a detailed analysis is carried out according to the nature of the gas to be detected and the environment in which it is located. Only then can it be regarded as the standard for installing combustible gas alarm. In future normal work, it can accurately detect the specific situation of possible leakage, give timely alarm to remind the staff in the environment, and take effective measures to deal with it in time, to ensure that the company's personal, property and other aspects of the loss.