The oxygen alarm can accurately detect the oxygen concentration in different environments, so it has a great application in the field of industrial production. However, in the process of using the oxygen alarm, we may encounter fluctuations in the detection value, which is manifested in the fact that the value displayed on the screen has been changing, and then it needs to be processed in time. So do you know what happened when the oxygen alarm detected data fluctuated greatly? The following is an introduction by Yiyuntian Electronics:

treatment measures:

1. when the oxygen alarm has large data fluctuation in the detection process, it can be solved according to the method in the instruction manual first. because the oxygen alarm will be affected by aging, it will have different degrees of zero drift. therefore, in order to avoid the occurrence of these 1 phenomena, the oxygen alarm can be reset to zero before use, which can generally solve the situation that the detection value fluctuates.

2. under normal circumstances, the large fluctuation of the detection data of the oxygen alarm is caused by improper operation. therefore, the correct operation steps should be strictly observed during the use of the oxygen alarm, and in the subsequent use of the oxygen alarm process needs to be regularly maintained, so that the data detected by the oxygen alarm are accurate and will not fluctuate.

To sum up, it is the possible cause and treatment measures of large fluctuation of oxygen alarm detection data. Oxygen alarm is used in the field of industrial production more testing instruments, therefore, if we encounter oxygen alarm detection data fluctuations, we must pay attention to processing, so as not to cause adverse consequences. Moreover, in order to ensure the normal use of the oxygen alarm, it is forbidden to place the oxygen alarm in a low or high position for detection. This is the principle of selecting the correct position and reasonable detection.