Oxygen alarm is of great significance in the process of installation and debugging. After all, the accuracy of installation and debugging is directly related to the performance and measurement accuracy of the instrument to a certain extent. Otherwise, once the oxygen detection is installed or Improper debugging may lead to inaccurate measurement results, which in turn leads to a series of problems, such as safety hazards or equipment failures in the production process. Do you know the installation and debugging steps of oxygen alarm ? The following is an introduction to yiyuntian electronic editor:

The installation and commissioning steps of the oxygen alarm are as follows:

1. Install

Determine the installation location of the oxygen alarm, it is usually selected in the area to be monitored, taking into account possible influencing factors such as temperature, humidity, pressure, etc.During the installation process, we need to ensure that the oxygen alarm is placed smoothly and avoid tilting or inverting, so as not to affect the accuracy of the test results.

2. Check

Before debugging, we need to check whether the appearance of the oxygen alarm is intact and whether the components are complete. After confirmation, we can proceed to the next step.

3. Calibration