The oxygen detector can effectively and accurately measure the concentration of oxygen in the environment and provide us with a reliable reference. Therefore, it plays an irreplaceable role in industrial production, laboratory research and daily life. However, in order to ensure the accuracy and reliability of the test results, the installation of the oxygen detector must meet certain specifications. Do you know what the oxygen detector installation specification requires? The following is a brief introduction by yiyuntian electronics:

oxygen detector installation specification requirements:

1. Install Location

able to accurately reflect the oxygen concentration in the monitored area, the oxygen detector should be installed more than 1.5 meters above the ground and as close as possible to the source of the gas to be monitored.At the same time, it is necessary to avoid installing the oxygen detector in places with large air flow such as doorways and windows, as well as in high temperature, high humidity, and high dust environments.

2. Installation method

The oxygen detector can be wall-mounted or ceiling mounted, the specific method should be selected according to the actual situation on site. During the installation process, make sure that the sensor part of the oxygen detector is facing down to facilitate the reception of the gas to be monitored. In addition, in order to ensure the normal operation and service life of the oxygen detector, severe vibration and collision should be avoided as much as possible.

3. Cable and power connections

the cable shall be explosion-proof and flame-retardant, and try to shorten the length of the cable to avoid excessive bending or folding. When connecting the power supply, the power supply matching the instrument should be selected, and the power supply should be well grounded to ensure the safety of the oxygen detector and personnel.

In summary, we can see the installation specification requirements of the oxygen detector, including installation location, installation method, cable and power connection, etc.Only by installing in accordance with the requirements of the specification can the normal operation and accurate monitoring of the oxygen detector be better ensured, thus providing a strong guarantee for industrial safety and environmental monitoring, and further exerting its important role in the field of industrial safety and environmental monitoring.