As we all know, the gas detector is the 1 instrument for gas leakage concentration detection. It can detect the concentration of gas in the environment. For example, there are some toxic and harmful gases or combustible gases in industrial production. It can quickly detect the composition and concentration of various contents in the industrial production environment gas, and quickly detect the results. So do you know how to use Gas Detector ? The following is a brief introduction by yi yun Tian:

gas detector usage:

before 1. use

1. carefully read the instruction manual corresponding to the gas detector before operation, familiar with the performance and operation of the machine.

2. Check whether the battery power is sufficient. If the battery power is insufficient, replace the battery in time.

3. Check whether the air filter at the air inlet is blocked by sundries. If the blockage is blocked, clean it up or replace it.

4. during the self-check during startup, listen to whether the graded alarm sound and light alarm and vibration alarm are accurate. if they do not meet the requirements, they are not allowed to be used and should be revised immediately.

during 2. use

1. The gas detector should be worn as close to the mouth and nose as possible, such as the front neckline of clothes, jacket pocket, etc., it is strictly prohibited to place the alarm in the pocket and other parts that are not easy to view, which will affect the detection value.

2. Collisions should be avoided as much as possible during use, resulting in abnormal detection data.

3. Components such as gas detector sensors are precision components. Do not open the cover of the adjusted instrument casually. Pay attention to waterproof and impurity entry during use to prevent abnormal data.

4. if there are abnormal situations such as continuous flashing of the indicator light, sudden no numerical display on the display screen, no movement of the numerical display in the area where the gas obviously exceeds the standard, and large gap, the operation shall be stopped immediately, and the problem shall be observed in the fresh air area, and the problem shall be eliminated in time, otherwise it is strictly prohibited.

after the 3. is used

1. Press and hold the shutdown key after the gas detector is used, and the display screen shows a 5-second countdown, after the countdown ends, the LCD displays "off", and then the instrument does not display, and the instrument is turned off. It is strictly forbidden to directly deduct the forced shutdown of the battery.

2. After the instrument is turned off, clean the dust attached to the surface and clean the equipment.

3. When the instrument is not working for a long time, it should be turned off and placed in a dry, dust-free environment that meets the storage temperature.

4. the gas detector shall be specially managed to prevent the loss of equipment and affect normal use.

In summary, it is how to use the gas detector. It is worth noting that in the process of using the gas detector, we also need to carry out regular maintenance on the gas detector. Only in this way can we improve the detection efficiency of the gas detector to a greater extent and ensure the accuracy of its data.