I believe everyone knows very well that hydrogen sulfide detector is the 1 gas detection letter currently used to detect the concentration of hydrogen sulfide in the air in real time. once it is found that the concentration of hydrogen sulfide exceeds the alarm point we set, the hydrogen sulfide detector will send out an audible and visual alarm function to remind the operators to take protective measures. However, in the process of using the hydrogen sulfide detector, in order to strengthen further safety, we need to regularly detect the hydrogen sulfide detector. Then how often does the H2S detector detect it? The following is a brief introduction by yi yun Tian:

Under normal circumstances, the hydrogen sulfide detector should be calibrated at least once a year.

According to national regulations, the hydrogen sulfide detector should be calibrated regularly, and the calibration cycle should be at least once a year. In the use of the process according to the usual maintenance, the environment is bad, according to these conditions to judge how long hydrogen sulfide detector calibration once. If in dusty, oily and humid environment, it is required to check once every 3 months. If there are special circumstances, the gas leakage does not alarm, false alarm or delay alarm, and timely check is required. 1 but failure timely inspection maintenance.

Under normal use, the hydrogen sulfide detector of the drilling crew needs to be calibrated once a year to ensure that the instrument can quickly, accurately and stably detect the concentration of hydrogen sulfide gas leakage. According to the specific use of hydrogen sulfide detector to analyze, use is not frequent enough, usually do a good job in the maintenance of hydrogen sulfide detector. For example, the hydrogen sulfide detector shall be cleaned in time to ensure sufficient power of the hydrogen sulfide detector and maintain appropriate charging frequency.

This is exactly the case. Hydrogen sulfide detector has been widely used in chemical, metallurgical, pesticide, pharmaceutical, metallurgical and other industries to detect dangerous places prone to hydrogen sulfide leakage such as workshops and factories. Hydrogen sulfide detector is an important instrument to ensure the safety of production and workers.

regarding how often does the hydrogen sulfide detector detect this problem, today yi yun tian xiaobian will introduce it to you. The safe use of hydrogen sulfide detector, to a certain extent, is directly related to the environmental safety of the whole enterprise. We must not be greedy for cheap, deal with inspection, and use it as a decoration after installation. Therefore, we must carefully choose regular manufacturers and regular products before purchasing.