modern life brings us a lot of convenience at the same time, it also brings us a variety of dangers, sometimes in some daily living environment (such as the use of natural gas kitchen), industrial environment, will be due to some gas leakage and lead to explosion, fire, poisoning and other accidents. After we install the gas alarm, when the flammable or toxic gas leaks and the gas concentration reaches the alarm value set by the gas alarm, the gas alarm will send out sound and light alarm signals to remind the safety measures such as personnel evacuation, forced ventilation, shutdown of equipment, etc. to prevent explosion, fire and poisoning accidents, thus ensuring safe production. So if we encounter gas alarm in our daily life, what should we do? The following is a brief introduction by yi yun Tian:

gas alarm alarm processing method:

1. When the gas alarm gives an alarm, under the condition of ensuring safety, immediately find out the cause of the alarm, and it is strictly forbidden to turn off the gas alarm directly.

(1) When the detector alarms due to combustible gas leakage and uses the automatic cut-off device, do not turn on the light or turn on any electrical switch.

(2) The window should be opened immediately for ventilation and wait for the red alarm indicator of the detector to go out.

(3) Find and confirm the cause of combustible gas leakage (if the cause cannot be confirmed, contact the relevant combustible gas company for treatment) and eliminate it.

2, notify the relevant responsible person and safety officer.

3. if the leakage of flammable liquid or the concentration of flammable liquid vapor exceeds the standard (25%), the alarm shall be caused, the leakage source shall be controlled immediately, the ventilation of the leakage area shall be strengthened, and the on-site personnel shall be notified to evacuate.

4. Clean the leakage source in the alarm probe area of the gas alarm.

5. Only after the leakage site is correctly handled, confirm that the gas alarm will not continue to alarm (combustible gas will not continue to leak), and press the manual switch to open the automatic cut-off device to restore combustible gas. Do not touch the power supply of the gas alarm to prevent the detector from working properly.

In summary, it is the processing method of the gas alarm. Because every 1 kinds of toxic and harmful gases, their chemical reactions and the emergency treatment methods leaked are different, emergency management personnel should also carry out emergency operation according to the chemical properties and correct treatment methods of these harmful gases according to local conditions when carrying out emergency treatment on the scene of the gas alarm alarm.