Chlorine alarm is the 1 important security equipment essential for enterprise safety production. It can effectively detect the concentration of chlorine gas and prevent the concentration of chlorine gas from exceeding the standard after gas leakage, so as to better protect the personal safety of workers. And we are in the process of using the chlorine alarm, it is inevitable that because of various reasons, resulting in some minor faults in the chlorine alarm. Do you know the common faults of chlorine alarm ? The following is an introduction by Yi Yuntian:

Common faults of chlorine alarm:

1. chlorine alarm sensor failure.

chlorine alarm is mainly composed of gas alarm controller and gas detector. the core component of gas detector is sensor, so the detector failure will be encountered in the process of using chlorine alarm. This may be caused by the falling off of the sensor plug inside the detector, or the failure of the sensor caused by the use of the gas detector in a harsh environment, for example, the concentration of chlorine in the detection environment seriously exceeds the standard or the gas detector is used in a high concentration environment for a long time, which may lead to the failure of the gas detector.

2. chlorine alarm communication failure:

When chlorine leakage in the working environment cannot be transmitted to the gas control after being detected by the chlorine alarm, and the accident occurs due to failure to send out information in time, there are mainly the following three possibilities:

1. There may be a wiring problem during the installation of the chlorine alarm, resulting in the controller and the detector not corresponding.

2. The actual number of connection paths of the detector of the chlorine alarm does not match the set number of paths.

3. if there is no problem with both of the above, the detector may not meet the standard and the voltage is lower than 15V.

In summary, it is the common fault of chlorine alarm. If there are some faults that cannot be judged in the process of using the chlorine alarm, contact the manufacturer in time and do not operate blindly to prevent danger. In addition, when choosing a gas alarm, you must choose a qualified manufacturer like Yiyuntian with complete certificates, no worries about security check and no worries after sales.