combustible gas alarm in the process of detecting combustible gas, the need to use the detector and the detection environment to communicate, so the environment of all kinds of polluting gases and dust into the detector is inevitable, the damage to the working conditions of the detector caused by the objective existence. If we do not do a good job of maintenance in the process of use, it will lead to errors in the detection of combustible gas alarms. Then you know combustible gas alarm how to use and maintain it? The following Yi Yuntian Xiaobian for you to introduce:

Combustible Gas Alarm Use and Maintenance Method:

1. The service life of detection components and compensation components is usually 3-5 years. Under the condition of reasonable use and proper maintenance, its service life can be extended.

2. For the gas alarm controller with test button, press the test button once a week to check whether the alarm system is normal. The zero point and range of the calibration alarm shall be checked every 2 months.

3. Always check the detector for accidental water ingress. The vent cover of the detector shall be removed and cleaned during instrument detection to prevent blockage.

4. The detector is explosion-proof and explosion-proof equipment and shall not be used beyond the specified range. The detector shall not be used in sulfur-containing applications. The detector should be used under the condition that the concentration of combustible gas is lower than the lower explosive limit, otherwise, it may burn out the components.

5. Hot-wire semiconductor detectors shall not be used under oxygen-deficient conditions. Do not direct the probe with a large amount of combustible gas.

To sum up, it is the use and maintenance method of combustible gas alarm. As long as we do a good job in the use and maintenance of combustible gas alarm, we can better ensure the normal operation of the equipment, prevent failure, and better play the use value of combustible gas alarm.