now, for some places where combustible gas may leak, we should install combustible gas alarms and set up combustible gas detection alarm points, so that when the concentration of leaked gas in the environment reaches the alarm value set in advance by the gas alarm, the alarm will give out an audible and visual alarm to prompt relevant measures to ensure safety. Do you know what to do when the Combustible Gas Alarm alarms? The following is a brief introduction by yi yun Tian:

1. Evacuate the workers in the operation site as soon as possible to avoid personal or collective poisoning accidents.

2. when the combustible gas alarm gives an alarm, under the condition of ensuring safety, immediately find out the cause of the alarm, and it is strictly forbidden to turn off the alarm directly.

3. Do not turn on the light or turn on any electrical switch when the combustible gas detector alarms due to combustible gas leakage and uses the automatic cut-off device.

4. turn on the exhaust fan and dilute the concentration of combustible gas through ventilation to prevent excessive concentration of combustible gas from the source and easily encounter explosion and deflagration of open flame.

5. notify the relevant responsible person and safety officer that if the leakage of flammable liquid or the concentration of flammable liquid vapor exceeds the standard (25%) and causes an alarm, the leakage source shall be immediately controlled, the ventilation of the leakage area shall be strengthened, and the on-site personnel shall be notified to evacuate.

6. emergency management personnel in the factory should quickly wear a full set of protective equipment and protective facilities to the site to check which leakage parts appear around the combustible gas alarm that alarms, and should focus on checking the joints between valves and pipelines, because these places are more prone to gas leakage location.

To sum up, some measures should be taken when the combustible gas alarm alarm occurs. In the process of using the combustible gas alarm, we only need to correctly operate and use the combustible gas alarm, and at the same time, we should deal with it rationally after the combustible gas alarm emits sound and light alarm, so as to achieve the correct function of the combustible gas alarm.