Combustible gas alarm is 1 kind of important safety equipment, through timely detection and alarm, can protect people's life and property safety, prevent fire, explosion and other major accidents. However, when the installation position of the combustible gas alarm is improper, it may cause it to fail to effectively detect the concentration of combustible gas, thereby increasing the risk of safety accidents. Then do you know that the combustible gas alarm is not installed properly? The following is an introduction by Yiyuntian Electronics:

when the installation position of combustible gas alarm is inappropriate, the following measures can be taken:

1. re-evaluate and select an appropriate installation location

(1) Follow the specification: according to the installation specification of combustible gas alarm, re-evaluate whether the current installation position is suitable.Generally speaking, the combustible gas alarm should be installed near the area where combustible gas leakage may occur, and to avoid interference from other factors.

(2) Consider the gas characteristics: According to the density (specific gravity) and air fluidity of the detected gas, select the appropriate installation height. For lighter than air gas (such as hydrogen), combustible gas alarm should be installed at a location closer to the ceiling; for heavier than air gas (such as liquefied petroleum gas), it should be installed at a location closer to the ground.

(3) Avoid interference: Ensure that the combustible gas alarm is installed away from electromagnetic interference sources, high temperature, humidity, oil smoke and other environmental factors that may affect its normal operation.

2. Adjust Installation Location