carbon dioxide detector is currently used in carbon dioxide gas concentration detection and carbon dioxide concentration over-standard alarm, can accurately detect the concentration of carbon dioxide and display real-time concentration values in the field, standard signal output, with signal stability, sensitivity and high precision, flameproof wiring suitable for a variety of dangerous places gas detector. In order to ensure the accuracy of the test data, it is essential to do a good job of installation. Do you know what to consider when installing a CO2 Monitor ? The following is a brief introduction by yi yun Tian:

Precautions for installation of CO2 detector:

1, after the alarm, do not open the electrical switch; Confirm the reason for the ultra-high carbon dioxide concentration and deal with it in time. If the reason is unknown, please contact the relevant gas department for a thorough inspection.

2, do not install in the surrounding concentration is too high smoke, jet insecticide (evaporation agent), flammable solvent (paint) place, otherwise it may also cause alarm.

3. after the concentration alarm signal is generated, the output control signal (AC220V) is locked. even if the gas concentration no longer exceeds the limit, the controlled equipment cannot automatically restore the pre-alarm state and must be manually restored (press the reset key or self-check key for 3 seconds).

4. Do not install it in places with large air flow, such as exhaust port, ventilation fan and door, which may affect the accuracy of carbon dioxide detector.

5. do not install it in a place with water vapor and many water droplets (relative humidity is 90%). otherwise, if the water vapor is too high for a long time, the sensor of the carbon dioxide detector will be damaged.

6. Do not install the carbon dioxide detector in a place where the temperature is below -30 ℃ and above 50 ℃.

7, do not press in the strong electromagnetic place.

To sum up, it is the installation precautions of the carbon dioxide detector. Carbon dioxide detector can be widely used in a variety of industrial environment and special environment of continuous on-line detection of carbon dioxide CO2 concentration, with signal stability, high precision, good repeatability and other advantages, in the breeding, agricultural greenhouses, pharmaceutical, municipal, sewage treatment and other fields have been widely used, has become an indispensable protective equipment in industrial safety production.