In many industrial production, hydrogen is often used, such as hydrogen side leakage detection in chemical plants or power plants. In order to effectively avoid the adverse effects caused by excessive hydrogen, we usually install hydrogen detectors at easy leakage points, so that when hydrogen leaks, an alarm will be issued in time, and relevant personnel can lock the leakage source in time according to the location of the alarm point and take corresponding measures to avoid the occurrence of hydrogen explosion accidents. Do you know how to use hydrogen detector ? The following is a brief introduction by yi yun Tian:

hydrogen detector the use of steps:

1. Press the power-on button of the hydrogen detector for more than 3 seconds to start up. At this time, the hydrogen detector will enter the self-check interface and automatically turn over the screen to display various gas measurement parameters. As it takes some time to activate the sensor, therefore, under normal circumstances, it takes 60 seconds to warm up.

2. After the hydrogen detector is started, it will automatically enter the main detection interface. If the hydrogen detector in use is restricted by the environment, it can be operated with a handle.

3. Press the menu key to enter the main menu of setting functions. The menu of hydrogen detector is mainly divided into display calibration settings, alarm settings, data recording, measurement settings, system settings and other functions. The corresponding setting functions can be selected through the up, down, left, and right direction keys, press the menu key again to enter each setting type.

4. if the hydrogen detector needs to set various relevant parameters, you can press the menu key to confirm the saving, and press the menu key when you need to return to the previous menu.

5. The air pump can be turned on or off through the menu button, and the sound alarm can be quickly turned on or off by pressing the left and right direction keys of the hydrogen detector at the same time.

To sum up, this is the use of hydrogen detector steps. However, due to the different manufacturers, there may be some small differences in the use steps of the hydrogen detector, as long as we follow the instructions provided by the manufacturer.